View BP5037_344720.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Communication ICs
AC / DC converter
BP5037
The BP5037 is an AC / DC converter that converts commercial AC100V power to )DC12V. It provides a simple power supply solution for computers, DC motors, and LEDs etc., and eliminates the need for a transformer. FApplications Home appliances such as rice cookers, IH cookers, air cleaners, refrigerators, and DC fan motors and sensors FFeatures 1) By eliminating the need for a transformer, power supply PC boards can be made small and compact. 2) Wide input voltage range (AC80Vrms to AC120Vrms). FAbsolute maximum ratings (Ta = 25_C)
3) Allows simple construction of a DC power supply with few external parts.
FRecommended operating conditions (Ta = 25_C)
FPin descriptions
649
Communication ICs
FElectrical characteristics (unless otherwise noted, Ta = 25_C)
BP5037
FMeasurement circuit
650
Communication ICs
FApplication examples Half-wave rectification type
BP5037
Full-wave rectification type
IH cooker application example
651
Communication ICs
FExternal components (1) Diode (D1) The rectifying diode should fulfill the following conditions. With regard to absolute ratings, the reverse surge current should be 400V or higher, the average rectifying current should be 0.5A or higher, and the forward surge current should be 20A or higher. An acceptable example is the 1SR35-400A.
BP5037
(2) Capacitor for input voltage smoothing For half-wave rectification use a capacitor of at least 33F, and for full-wave rectification use a capacitor of at least 10F. In both cases, the capacitor should have a withstanding voltage of at least 200V. (3) Coil (L1) The inductance should be in the range 820H to 1.8mH, and the rated current should be at least 0.3A. This coil influences the characteristics of the BP5037, so consult your sales representative before use. (4) Capacitor for output voltage smoothing (C2) This capacitor should have a low ESR. Capacitors designed for low-impedance switching power supplies are especially suitable. The withstanding voltage should be at least 35V and the allowable ripple current should be at least 0.1A.
FOperation notes (1) Component placement Refer to the component placement diagram and keep the cross-hatched distances as small as possible.
(2) In-rush current suppression resistor Use an in-rush current suppression resistor of 10 or lower.
(3) The output current needs to be reduced as the ambient temperatures rises.
(4) Lead pins should be securely soldered. If the common pins are not securely connected, or pins which connected internally but are not used are connected to other pins, abnormal voltages can be generated resulting in component failure. (5) Excessive current and shorted leads The excessive current limit is a drooping model. At 25_C, if excessive current which exceeds the absolute maximum ratings is produced intermittently, or is produced continuously for a total of one minute or longer, the product is vulnerable to damage. If there is any danger of the load being shorted or excessive current being produced, always use a protective device such as a fuse. (6) Do not subject this product to strong impact. (7) Regulations governing electrical products As a stand-alone product, this product is not subject to regulations governing electrical appliances. Please be aware, therefore, that applications must be submitted for sets and not for individual products. (8) Insulation This product is not insulated on the primary or secondary sides, and there is danger of electrical shock if it is touched. (9) Connection with other devices Equipment using this product should not be connected to other equipment. If connected, insulation should be provided.
652
Communication ICs
FElectrical characteristics curves
BP5037
FExternal dimensions (Units: mm)
653

▲Up To Search▲

Price & Availability of BP5037

	To Download BP5037 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .